LJ-3000B walk-in salt spray environmental test chamber-Guangdong LIK Industry Co., Ltd._Test box

Tel: +86-769-22718086 | Alibaba

Home page

LJ-3000B walk-in salt spray environmental test chamber

Classification:

Walk-in environmental chamber

Salt spray and rain climate test equipment

Key words:

Inquiry

Product Description

Main technical parameters

1.TypeNo.Name:LJ-3000BWalk-in salt spray environmental test chamber

2.Inner box size:3000*2000*2000mm(Wide*Deep*High)((without spire110° part))

3.Volume:12m³ (excluding the spire part)

4.Bottom plate bearing:1000Kg/M²(Uniform load）

5.Basic technical requirements:

6.Temperature fluctuation: ≦ ±0.5℃ (at no load)

7.Temperature stability: ≦ ±2℃ (at no load)

8.Spray volume1~2ML/ 80CM²/H (16hourly average)

9.ＰHValue:3.0~7.5 (Adjustable)

10.Spray mode: continuous, intermittent spray can be switched at will

11.Voltage:380:80A

Outer boxWall material:

The wall material of the test box shall be assembled with library board, and the thickness shall not be less100mm; external material of library board is adoptedSUS304Stainless steel bending forming, the surface of the grinding electrostatic spray processing, can reduce the stainless steel surface reflection when the uneven phenomenon, the external stainless steel plate can increase the strength of the box.

4.2Inner box wall material:

Adopt316LStainless steel or8mmthicknessPPmade of sheet metal,PPThe plate has good acid and alkali corrosion resistance, high temperature resistance, aging resistance, environmental protection and processability. It is the best upgrade alternative material for traditional FRP polyurethane materials.

The middle insulation layer adopts high density polyurethane foam material, thickness100mmAbove, it has good thermal insulation and supporting strength. The library board splicing is equipped with high-strength and high-performance special connectors to ensure the overall connection of the box body is firm. The imported weather-resistant waterproof adhesive sealant is used at the external joints of the library board, and the effect is much better than glass glue. InternalPPThe joint board adopts high temperature welding, has good sealing, long-term use of chemical corrosion resistance and no water leakage. The inner and outer boxes are designed with concealed wiring troughs according to the assembly needs of parts. Water pipes, wires, air pipes, etc. can be placed in the wiring troughs. The rear surface of the cover plate is flat to increase the external appearance of the box,

LJBT-4500 walk-in collapse aging test chamber

Walk-in thermostatic room

LJBT-4500 walk-in collapse aging test chamber

Walk-in thermostatic room