[vibration test bench] four common troubleshooting

Source:

Release date: 2019-04-30

[vibration test bench] four common troubleshooting

Cannot stop after 1. the set time

1Check whether the operation steps are set correctly, and check again according to the instructions.

2, check whether the internal code is correct, according to the parameter table to repeat the correct

3.Shut down, reset the internal code, and set it again according to the operation steps.

II. There is abnormal noise when working on the platform

1If you use the naked eye to see the abnormal sound of the test object binding contact surface, please re-bind or check the table body.

2Check whether the spring steel sheet inside the platform body is broken. If it is the best size(Long and wide)You can inform the manufacturer or send it back to Xiamen Deyi equipment.

3. cannot be connected to computer control(With microcomputer model)

1, checkRS232Whether the connection port is connected and in good contact, and reconnected

21. Check whether the power switch of the control box is turned on. If not, pressON(Turn on the power)

3Check whether the connection around the computer is correctly connected, reconnect and confirm it again and again.

4, checkRS232Serial computer setting isCOM1StillCOM2,Just replace the setting

54. Whether the program screen is opened correctly and set correctly, refer to the microcomputer manual for setting steps

IV,Some numbers appear in the computer program and prompt the contact building.]Deyi provides authorization code

1,Confirm whether other external devices have been added to the computer or used for other purposes

2、Check if the computer is working properly(Do not work with vibration table)

3Check whether the communication line is broken or the insulation layer is peeled off

4The vibration test bench may be due to personnel problems or self-modification caused by the loss of system files or forgotten password, in this case to contact the manufacturer and send back to the company's computer host to reset

Handling Precautions of Sweep Frequency Vibration Test Bench

1,When handling the excitation table, please apply force from the bottom of the bracket, do not directly apply force to the excitation table, and handle it gently.

2When carrying the console body, please use the handles on both sides of the console body and handle it gently.

Precautions for Installation of Sweep Frequency Vibration Test Bench:Ground installation:

When the instrument is placed on the ground, pay attention to the horizontal placement. In order to ensure the correct use of the instrument, please read the operation manual of Xiamen Deyi vibration table carefully before operating the instrument. Please keep the operation manual properly so that you can consult it quickly when you encounter problems.

Previous Page: Installation, maintenance and maintenance of impact testing machine

Next Page: [programmable constant temperature and humidity box] refrigeration cycle fault detection