Lijia Tips: [Constant Temperature and Humidity Test Chamber] Matters needing attention in purchasing

Source:

Release date: 2019-05-27

What are the main aspects of the constant temperature and humidity test box? What model, what configuration of the test equipment is the most suitable for their own? In this, finishing an article on the constant temperature and humidity test box to buy matters needing attention, hoping to help manufacturers, scientific research units, institutions in the purchase of products, there is a reference index.

 

First of all, select a suitable test equipment, according to the size of the test sample, the test box liner selection. Product will be tried out(Components, assemblies, parts or complete machines)When placed in a climate chamber for testing, in order to ensure that the tested product meets the requirements of the test specification.Ambient conditions, climate chamber workspace dimensionswithOuter dimension of product under testThree points should be followed:

 

1The volume of the tested product shall not exceed the effective working space of the test chamber.(20-35)For products that generate heat in the test, it is recommended to use no more30mm;

 

2The ratio of the windward sectional area of the tested product to the total area of the working chamber of the test chamber on this section shall not be greater(35-50);

 

3The distance between the outer surface of the tested product and the wall of the test box shall be kept at least.100-150mm.

 

InProduct PerformanceOn the other hand, we also need to choose carefully! It is important to consider several aspects:

 

1, Temperature range: What is the temperature range of the device. There are currently four common standard temperature ranges:0 ℃ ~ 100 ℃;-20 ℃ ~ 150 ℃;-40 ℃ ~ 150 ℃;-60 ℃ ~ 150 ℃. Such as customer demand non-standard temperature, also can produce production.

 

2Cycle function: whether the equipment has the temperature cycle function, that is, the repeated cycle switching curve cycle between temperatures.

 

3Humidity range: whether the equipment has humidity function. With a humidity range, we call it a high and low temperature humidity test chamber or a constant temperature and humidity test chamber.

  

4The choice of system control hardware. In terms of hardware purchase, it is mainly based on the actual operation of the customer, the test purpose and the combination of product cost. Such as: in the refrigeration, the general production of imported France“Taikang”Enclosed Refrigeration Compressor Unit, USA“Danfoss”Thermal expansion valve,“Emerson”Filter drier, Italy“Casto”Solenoid valves and so on. In the control panel, there are domestic ordinary button type and South Korea imported large full touch screen control mode.