Home page

Lijia Tips: [Cold and Hot Impact Test Chamber] Three Steps for Dust Removal

Source:

Release date: 2019-05-31

Hot and cold impact testing machineIs the metal, plastic, rubber, electronics and other materials industry necessary test equipment, Used to test material structures or composite materials, in an instant under the pole.High temperature and very low temperatureThe degree of continuous environment can be tolerated, and the chemical changes or physical damage caused by thermal expansion and contraction of the sample can be detected in the shortest time. Divided into two-box type and three-box type, the difference is that the test method and internal structure are different.

So how can the high and low temperature alternating damp heat test chamber be carried out effectivelyDust removalWhat?What?

First of all,,To keepHot and cold shock test chamberCleaning of the inside and outside of the box,The cold and hot shock test chamber should be cleaned of internal impurities before operation.,The distribution room should also be cleaned more than once a year.,When cleaning, you can use a vacuum cleaner to clean the dust in the room. The exterior of the box should also be cleaned more than once a year.,Wipe with soapy water when cleaning.

and then,Is to check the cold and hot impact test box,Remember to check the over-temperature protector of the cold and hot shock test chamber.,The water storage in the humidifier should be replaced once a month.,to ensure clean water quality,The humidifying tray should also be cleaned once a month,to ensure a smooth flow of water.

　　Finally,It is the maintenance of the cold and hot impact test box,Condenser must remember the monthly regular maintenance,Use a vacuum cleaner to remove the dust attached to the condenser heat dissipation mesh.

Previous Page: Lijia Small Classroom: Basic Operation Steps of [Cold and Hot Impact Test Chamber]

Next Page: Lijia Tips: Programmable [Constant Temperature and Humidity Box] Operation Precautions